Blog

Hiditec BZ V2 650W + AMD RX 9060 XT / RX 9070: the €50 PSU that nails RDNA 4

Hiditec BZ V2 650W + AMD RX 9060 XT / RX 9070: the €50 PSU that nails RDNA 4
PSU GUIDE — AMD RDNA 4 BUILDS 2026

Hiditec BZ V2 650W + AMD RX 9060 XT / RX 9070:
the €50 PSU that nails RDNA 4 — backed by independent test data

The RX 9060 XT (160 W) and RX 9070 (220 W) are AMD's most efficient RDNA 4 cards. Both pair perfectly with a 650 W PSU — and hardware analyst Router Eros has the numbers to prove the BZ V2 650W is up to the task.

At a glance

RX 9060 XT + mid-range CPU draws 280–330 W under gaming load. The BZ V2 650W runs that system at 43–51% rated capacity — right in its measured peak efficiency window of 86.25%.

RX 9070 + mid-range CPU draws 380–430 W. Still well inside the 650W envelope — the unit measured 85.76% efficiency at that load.

0.42% load regulation on the 12V rail. The voltage your GPU receives at peak load is virtually identical to idle — no sags, no micro-stutters from the PSU side.

ALPM compatible. RDNA 4 cycles aggressively between deep idle and full draw between frames. The BZ V2 650W is certified to handle those transitions without destabilising.

Both the RX 9060 XT and RX 9070 use standard dual 8-pin PCIe connectors — no 16-pin adapter, no fire risk. The BZ V2 650W includes four 6+2 PCIe connectors across two cables, covering both cards without adapters or compromises.

1. Real power draw: what full RDNA 4 builds actually consume

GPU TBP is only part of the picture. Here is full-system estimated draw for the most common RDNA 4 build scenarios, and where each one lands on the BZ V2 650W's measured efficiency curve.

BuildComponentsGaming drawPSU loadVerdict
1080p (RX 9060 XT)Ryzen 5 7600 + RX 9060 XT + 32 GB DDR5~280–320 W43–49%Ideal
1440p (RX 9060 XT)Ryzen 5 7600X + RX 9060 XT 16GB + 32 GB DDR5~310–350 W48–54%Ideal
1440p (RX 9070)Ryzen 7 7700X + RX 9070 + 32 GB DDR5~380–430 W58–66%Very good
1440p (RX 9070 + X3D)Ryzen 7 9800X3D + RX 9070 + 32 GB DDR5~440–480 W68–74%BZ V2 750W recommended

2. The measured data: efficiency and 12V regulation from the independent review

Router Eros tested the BZ V2 650W from 10% to 115% load using a Passmark PM123 tester, multimeter and wattmeter. Below are the key rows — mapped to real RDNA 4 gaming scenarios.

AC (W)DC (W)Efficiency12V5V3.3VGaming scenario
325280.386.25% ★12.06V5.01V3.28VRX 9060 XT — 1080p gaming
39033586.10%12.04V5.02V3.28VRX 9060 XT — demanding 1440p
455390.285.76%12.04V5.01V3.27VRX 9070 — 1440p gaming
520442.685.12%12.04V5.01V3.28VRX 9070 — stress scenario
Load regulation results: 12V rail 0.42% · 5V rail 0.60% · 3.3V rail 0.61% · 5VSB 0.40%. The ATX standard allows ±5% on each rail. The BZ V2 650W stays within 0.61% across all three — that is the stability margin that keeps your GPU and RAM running clean throughout a gaming session.

3. What is inside: key components identified in the teardown

Router Eros opened and photographed every major component. Here are the ones that matter most for long-term reliability and power quality.

Bulk capacitor

Toshin Kogyo TK LW — 400V, 330 µF, 105°C. Japanese manufacturer, top-tier thermal class. Directly supports the "Japanese capacitors" claim on the box.

+12V MOSFETs

3× Oriental Semi SFS130N06P — 60V, 130A. Synchronous rectification design: more efficient than traditional diodes and directly responsible for the tight 0.42% 12V regulation result.

Topology

APFC + Double-Forward (primary). DC-DC converters for 5V and 3.3V rails — a quality indicator that explains the excellent cross-load regulation across all minor rails.

Protection IC

Grenergy GR8329E — covers OCP, OVP, UVP, SCP and Power Good signal. Full active protection suite across all rails, confirmed in the independent test.

4. Router Eros's verdict: pros and cons

This is the independent reviewer's own assessment — not Hiditec's summary. His closing line: "Worth the price!"

Pros

  • DC-DC topology on minor rails
  • Excellent load regulation across all rails
  • Long, individually sleeved cables
  • ALPM compatible
  • 105°C Japanese bulk capacitor
  • Price — 49.99€
  • 7-year warranty

Cons

  • Samxon filtering capacitors on secondary side (105°C, functional — but not the top tier found in the BZ PRO line)

Which Hiditec PSU for your AMD RDNA 4 build?

BZ V2 650W — RX 9060 XT builds

Ryzen 5 + RX 9060 XT. Peak efficiency zone, verified regulation, ALPM certified. 49.99€.

BZ V2 750W — RX 9070 builds

Ryzen 7 + RX 9070. Same quality, extra headroom for higher-TDP CPU pairings. 55.95€.

BZ PRO 750W — step-up option

Nichicon and Rubycon filtering caps throughout. For builds where internal component quality is the priority above all else.

Leave a Reply

Captcha

We use cookies to improve your user experience, improve our websites and publish advertisements that may be of interest to you. We use cookies to optimize the functionality of the site and offer you the best possible experience. You can get more information here.

Sign in

Megamenu

Your cart

There are no more items in your cart